Citygrid On Pole
A wide detection, all-in-one solution. Install on any luminaire pole in the preferred height.
Smart streetlight
The Citygrid On Pole controller can turn any street light into a motion controlled smart luminaire.
Robust detection
With patent pending detection algorithms and the slight angle of the sensor towards traffic direction, pedestrians, cyclists and vehicles are reliably detected.
Cloud enabled system
Operation of the installation can be as standalone (non-connected) or connected to the Citygrid cloud solution using the Citygrid Gateway.
Key features
All the Citygrid Controllers provide the same core functions, but some key features distinguish the different Citygrid Controllers from each other.
Retrofitting and design freedom
The Citygrid On Pole Controller can be retrofitted to any luminaire. Its placement on the pole can be helpful when having a luminaire design without any good location for the internally mounted controller or Zhaga mounted Controllers.
Select installation height
The Citygrid On Pole Controller can be installed in the desired height. This can be beneficial for tall luminaires where the motion detection might be improved by placing the sensors a bit further down.
Double sensor design
The Citygrid On Pole Sensor has two motion sensors both angled towards the road. The double sensor design increase the detection area.
Specifications
|
Input voltage |
86-265 |
Vac |
|
Power consumption |
1,2 |
W |
|
Dimming range |
0..100 |
% |
|
Frequency Range |
868,3 |
MHz |
|
IP rating |
IP66 |
|
|
IK rating |
IK09 * |
|
|
Operational temperature |
-20 to +60 |
ºC |
* Lenses excluded
Dimensions
|
A |
220 |
mm |
|
B |
55 |
mm |
|
C |
55 |
mm |
|
Weight |
1,2 |
kg |
Motion detection
|
Height h |
Length a |
Length b |
Unit |
|
3 |
9,8 |
9,8 |
m |
|
4 |
9,5 |
9,5 |
m |
|
5 |
9,2 |
9,2 |
m |
|
6 |
8,7 |
8,7 |
m |
Compliance and certification
RoHS compliant